Real C_IBP_2305 Exam Questions are the Best Preparation Material
Practice on 2023 LATEST C_IBP_2305 Exam Updated 86 Questions
SAP C_IBP_2305 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION # 18
What are the possible ways that an attribute intended for use as an attribute as a key figure can be created and assigned?
- A. Created as type INTEGER and assigned to a compound master data type
- B. Created as type INTEGER and assigned to a simple master data type
- C. Created as type NVARCHAR and assigned to an external master data type
- D. Created as type DECIMAL and assigned to a compound master data type
Answer: D
NEW QUESTION # 19
Forecast Error CV is an input to which of the following?
- A. Calculate Target Inventory Components in Inventory Planning Profile Operator
- B. Multistage Inventory Optimization in Inventory Planning Profile Operator
- C. Time-Series-Based Supply Planning Optimizer
- D. Forecast Error Calculation in Inventory Planning Profile Operator
Answer: B
NEW QUESTION # 20
You need to use your resource cost effectively with a certain minimum use, even if it means producing more than demand.Which solutions would apply to this scenario?Note: There are 2 correct answers to this question.
- A. Minimum capacity utilization will result in pull production occurring.
- B. Excess stock can be generated and will need to be staged in an overflow warehouse.
- C. Capacity leveling will be possible for production and storage resources.
- D. Balance can be achieved between excessive prebuild and minimum use by incorporating violation costs.
Answer: B,D
NEW QUESTION # 21
Which of the following are features of lag-based snapshots?Note: There are 2 correct answers to this question.
- A. Lag-based snapshots are created in the Configuration app for a fixed time range.
- B. Target key figures for these snapshots are exposed to the user in planning views.
- C. Target key figures for these snapshots must have lag as a root attribute in its base planning level.
- D. The number of lag-based snapshots are limited to nine levels.
Answer: A,C
NEW QUESTION # 22
You are implementing SAP IBP to plan for a supply chain that experiences high seasonality.What supply planning operators can be used in your model to plan stock pre-builds?
- A. Supply optimizer only
- B. Finite heuristics only
- C. Supply optimizer and supply heuristics
- D. Finite and infinite heuristics
Answer: C
NEW QUESTION # 23
You need to integrate data from SAP S/4HANA and legacy ERP to SAP IBP.What are the integration tools that you can use with such a setup for data transfer?Note: There are 2 correct answers to this question.
- A. Smart Data Integration
- B. Cloud Identity Authentication Service
- C. Cloud Integration for Data Services
- D. Real-time Integration
Answer: A,C
NEW QUESTION # 24
SAP IBP ensures interoperability with which applications?Note: There are 2 correct answers to this question.
- A. User management in SAP Success Factors
- B. Financial Planning in SAP Analytics Cloud
- C. Business Network in SAP Ariba
- D. Salesforce Sales Cloud
Answer: B,C
NEW QUESTION # 25
You define fixing for a key figure.Which of the following functions are available for this key figure? Note:
There are 2 correct answers to this question.
- A. Fixing is possible for system editable key figures.
- B. Fixing is possible for a certain quantity of a key figure value.
- C. Fixing is possible for manually editable key figures.
- D. Fixing is possible for a certain period, including all child values in the hierarchy.
Answer: A,D
NEW QUESTION # 26
Using the import/export functionality means working with groups of items that are organized into collections.What is the best practice for managing collections?
- A. A planning area with its time profile must be bundled in one collection.
- B. A planning area with the copy operators assigned must be bundled in one collection.
- C. You should delete collections after they have been transported.
- D. Configuration items should be bundled in the collections based on the SAP IBP project stream.
Answer: A,B
NEW QUESTION # 27
You are reviewing the master data types that are often used for supply and inventory planning
.Which master data types are compound master data types?Note: There are 2 correct answers to this question.
- A. SOURCEPRODUCTION
- B. SOURCELOCATION
- C. SOURCECUSTGROUP
- D. SOURCECUSTOMER
Answer: B,D
NEW QUESTION # 28
Which of the following approaches could you take to reduce run times of an optimizer?Note: There are 3 correct answers to this question.
- A. Avoid using telescopic time buckets.
- B. Increase the use of incremental lot size beyond the frozen horizon.
- C. Keep the number of fairshare segments small.
- D. Use non-overlapping networks by using subnetwork ID maintained at Location-Products to reduce the size of the problem.
- E. Split into multiple planning areas to support weekly vs. daily planning needs.
Answer: A,D,E
NEW QUESTION # 29
You want to maintain key figure values for a new attribute and value combination, using SAP IBP, Add-in for Microsoft Excel, and are receiving an error related to missing combinations.How can you resolve this problem?Note: There are 2 correct answers to this question.
- A. Use the Check Mode operator to create the combinations
- B. Use the Data Integration app to load suitable data that creates the combinations
- C. Use the option New Planning Object in the SAP IBP, add-in for Microsoft Excel
- D. Use the Manage Master Data app to create the combinations
Answer: B,D
NEW QUESTION # 30
You are starting a new implementation project for SAP IBP and are considering the possible system architecture.What are the possible approaches for setting up the system landscape?Note: There are 2 correct answers to this question.
- A. Set up a two-tier landscape, and have the configuration of the development system regularly updated from the production system.
- B. Create additional planning areas in the test system to support training needs.
- C. Set up a three-tier landscape using transport, starting from the development system to test and production.
- D. Create additional test planning areas in the production system to support cutover needs.
Answer: A,C
NEW QUESTION # 31
Which are the mandatory preconditions for an attribute that can be used for saving the segmentation results?Note: There are 2 correct answers to this question.
- A. The attribute belongs to a simple or compound master data type.
- B. The attribute should be a non-key attribute of the master data type.
- C. The attribute should be assigned to all planning levels.
- D. The Business Meaning of the attribute has been specified.
Answer: A,B
NEW QUESTION # 32
Which of the following are functions of SAP IBP for demand?Note: There are 2 correct answers to this question.
- A. Detailed statistical analysis of demand data using predictive analytics tools
- B. Consideration of demand-driven analysis for buffer positioning.
- C. Embedded, on-the-fly demand analytics
- D. Demand sensing of demand data using predictive analytics tools
Answer: A,C
NEW QUESTION # 33
Where can the results of a Time Series Analysis be used?Note: There are 2 correct answers to this question.
- A. During XYZ segmentation in the Manage ABC/XYZ Segmentation Rules app
- B. In the Microsoft Excel add-in, where you can use them to limit and filter your planning views
- C. In the Manage Forecast Error Calculations app - Demand Planning app to calculate the Forecast Error CV
- D. In Global (multi-stage) Inventory Optimization to calculate time-phased Recommended Safety Stock Outputs
Answer: A,D
NEW QUESTION # 34
You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing.Which of the following parameters can you model to plan production with extra shift(s)?
- A. Adjusted production interactive values
- B. Capacity expansion with additional costs
- C. Incremental production values
- D. Production source validity at the start of seasonal peak
Answer: B
NEW QUESTION # 35
You need to make manual adjustments to your S&OP plan.Which are possible ways of making these changes?Note: There are 2 correct answers to this question.
- A. Leveraging the functionality of SAP Workzone
- B. Using Driver-Based planning
- C. Using Microsoft Excel planning views
- D. Leveraging the web-based planning capability
Answer: C,D
NEW QUESTION # 36
Which of the following solutions should be satisfied with violations penalized by the objective function of the time-series supply optimizer? Note: There are 3 correct answers to this question. Not adhering to maximum transport values
- A. Not-fully satisfied demands
- B. Not respecting production capacity
- C. Violation of minimum resource utilization
- D. Violation of minimum aggregated inventory values
Answer: A,C,D
NEW QUESTION # 37
Which conditions have to be fulfilled as a prerequisite to maintain a key figure disaggregation?Note: There are
2 correct answers to this question.
- A. The key figure is calculated and all editable.
- B. The key figure is stored and system editable.
- C. The key figure is stored and all editable.
- D. The key figure is calculated and system editable.
Answer: C
NEW QUESTION # 38
You define fixing for a key figure.Which of the following functions are available for this key figure? Note: There are 2 correct answers to this question.
- A. Fixing is possible for system editable key figures.
- B. Fixing is possible for a certain quantity of a key figure value.
- C. Fixing is possible for manually editable key figures.
- D. Fixing is possible for a certain period, including all child values in the hierarchy.
Answer: A,D
NEW QUESTION # 39
You are setting up planing with lot sizes.What are some of the properties of lot sizes that you need to be aware of?Note: There are 2 correct answers to this question.
- A. Lot sizes are applicable for production and handling quantities.
- B. Lot sizes are time-independent master data settings.
- C. Periodic lot size setting overrides the minimum lot size.
- D. Lot sizes are applicable for production and transportation quantities.
Answer: A,B
NEW QUESTION # 40
You set up time-series integration using Cloud Integration for Data Services. During the integration process of master data, an error occurred. In the Data Integration app the job failed with status "Fatal Error". How can you find more details about the error?
- A. Download the Initial Problem Report in the Data Integration app.
- B. Navigate to the Master Data Workbook in Excel and open the Log.
- C. Navigate to the Manage Master Data app and open the Log.
- D. Download the Rejection Report in the Data Integration app.
Answer: C
NEW QUESTION # 41
Which of the following checks for master data and key figures does the Check Mode algorithm trigger?Note: There are 3 correct answers to this question.
- A. It checks whether the location resource specified in the master data forms a cycle in the supply chain network.
- B. It checks whether the heuristic detects cycles formed by nodes (such as location products) in the supply chain network.
- C. It checks whether the required planning level master data exists for a subset of input key figures.
- D. It checks whether the location products specified in the master data are connected by customer sourcing rules within the supply chain network.
- E. It checks whether the sourcing in the Production Source Item Master Data type exists.
Answer: B,C,D
NEW QUESTION # 42
......
Authentic C_IBP_2305 Exam Dumps PDF - Nov-2023 Updated: https://torrentvce.pass4guide.com/C_IBP_2305-dumps-questions.html